How to Set Up RTMP Streaming in Moblin with DJI Pocket 3/DJI Action 4/5 Print

Follow these steps to configure RTMP streaming in Moblin and connect your DJI Pocket 3:

1. Enable the RTMP Server

1. Open the Moblin app.
2. Go to Settings.
3. Navigate to RTMP Server.
4. Press Create.
5. Toggle the switch to Enable the RTMP Server.

2. Configure DJI Devices in Moblin

1. In Settings, select Show all Settings.
2. Navigate to DJI devices.

3. Connect Your DJI Pocket 3

1. In the DJI devices settings, set your WiFi name and password.
2. Turn on your DJI Pocket 3.
3. Scroll up in the Moblin DJI device settings and press Select Device.
4. Your DJI Pocket 3 should appear in the list of available devices. Select it.

4. Start Streaming

1. Scroll down in the Moblin DJI device settings.
2. Press Start Streaming.
3. The stream should start, and you can verify it’s working correctly.

---

Troubleshooting Techniques for Moblin RTMP Streaming

1. Setting the Video Source to RTMP Server

Go to Scenes in settings. Set Video Source to the RTMP Server you created.

2. Understanding the Local RTMP Server

Your phone acts as an RTMP server, receiving the DJI stream and using it as a video source. The app creates a "local" RTMP server to send data from the DJI camera to the phone.

3. Handling Buggy Connections

It might take several tries to connect successfully. Try all the different IP addresses assigned to the RTMP on the DJI settings page. Set a stream key under RTMP settings.

4. Creating a Stream Key

Set the stream key under RTMP "My Server" on the RTMP settings page. The stream key can be any value you choose; it functions like a local password.

5. Starting the Stream

After setting up the RTMP server and stream key, press the big red Start button to begin streaming.